For screen reader problems with this website, please call801-619-94738 0 1 6 1 9 9 4 7 3Standard carrier rates apply to texts.

AVI Systems

AVI Systems

801-619-9473

Monitor Audio WT-1 Wireless Transmitter

Model #: WT1

At a Glance

WT-1 and WR-1 are diminutive wireless transmitter and complementary receiver modules measuring just 6 cm round by 4 cm deep. They can be used together to create a simple wireless zone extension, or to enable wireless rear speakers in a home theatre system.

WarningProposition 65 Warning for California Residents
Monitor Audio WT-1 Wireless Transmitter

General Specs

Product Weight (lbs.)0.5
Depth (in.)1.6
Width (in.)2.3
Height (in.)2.3
Manufacturer Warranty5 Year

General

FormatsCompact Wireless transmitter module
Frequency Response20 Hz – 20 kHz
Wireless TypeLossless/uncompressed Digital 2.4 GHz band
Wireless Range10 m (dependant on building construction)
Input Impedance> 20K Ohms
InputsAnalogue stereo inputs/outputs (RCA)
A.C Mains AdaptorExternal plug type power supply (94-264 VAC) 5v output with world plug pins
D.C Input Voltage5v @ 50mA
IndicatorsLED – on/connected
Power Consumption< 0.5 Watts standby - ErP certified
Dimensions (H x W x D)68 mm x 32 mm (2.69 x 1.25")
ApprovalsETL/ CE/ Fcc/CB/ Erp
Weight5.76 kg (12 lb 11 oz)

Monitor Audio WT-1 Wireless Transmitter

Model #: WT1
252380
Model #: WT1
Monitor Audio
$99,999.00

Call for Best Price

At a Glance

WT-1 and WR-1 are diminutive wireless transmitter and complementary receiver modules measuring just 6 cm round by 4 cm deep. They can be used together to create a simple wireless zone extension, or to enable wireless rear speakers in a home theatre system.

Get to know this product.

The WT-1 and WR-1 are the ideal partners for placing between sources and amplifiers or amplifier and subs.

The WT-1 can be used in conjunction with the WS-10 subwoofer to create a wireless sub-woofer system for use with any AV receiver or amplifier with LFE or stereo outputs. The units configured are stereo and can transmit full audio band stereo in a lossless, uncompressed format; therefore preserving the signal quality and integrity. A single LFE channel can be used for sub-woofer applications.

This module is ultra-compact and can be hidden out of sight a the back of an equipment rack, amplifier or TV. Once the modules are switched on, they will automatically lock on to each other and connect. No buttons to press or pairing is required. The set up process could not be any simpler.

A non-slip silicon rubber base is designed to not mark or leave residue on surfaces.

WT1/WR1 are designed and approved to ErP standards and comply with Eco design for energy related products Regulations for Energy-Related Products Directive 2009/125/EC. This means the units consume less than 0.5Watts of power in standby mode.

Lossless/uncompressed Digital 2.4GHz band

Wireless Range - 15M (dependant on building construction)

< 0.5Watts standby - ErP certified

Please note: The WT-1 and WR-1 cannot be used to power speakers directly.

Useful Documents
Specifications

General Specs

Product Weight (lbs.)0.5
Depth (in.)1.6
Width (in.)2.3
Height (in.)2.3
Manufacturer Warranty5 Year

General

FormatsCompact Wireless transmitter module
Frequency Response20 Hz – 20 kHz
Wireless TypeLossless/uncompressed Digital 2.4 GHz band
Wireless Range10 m (dependant on building construction)
Input Impedance> 20K Ohms
InputsAnalogue stereo inputs/outputs (RCA)
A.C Mains AdaptorExternal plug type power supply (94-264 VAC) 5v output with world plug pins
D.C Input Voltage5v @ 50mA
IndicatorsLED – on/connected
Power Consumption< 0.5 Watts standby - ErP certified
Dimensions (H x W x D)68 mm x 32 mm (2.69 x 1.25")
ApprovalsETL/ CE/ Fcc/CB/ Erp
Weight5.76 kg (12 lb 11 oz)
WarningProposition 65 Warning for California Residents